Find out if your home needs rain gutters—and which materials are the most durable, DIY-friendly, and cost-effective.
5 Types of Gutters to Consider for Your Home in Lafayette, Louisiana
Rain gutters, which run along the base of a roof, do more than keep downpours from drenching people as they come and go. By channeling water out and away from your home’s foundation, rain gutters reduce the risks of a flooded basement or damaged siding and minimize erosion and harm to your landscaping. What’s more, folks hoping to conserve water can direct runoff from gutters into a rain barrel to serve as a reservoir for the garden. Although rain gutters are simple structures, they come in a variety of configurations and are typically manufactured from five different materials—so whether it’s time to replace old and rusted gutters or you’re installing them for the first time, here’s what you need to know to make the best choice.
Are Gutters Always a Given?
First, figure out if your house really needs rain gutters. Most do, but there are exceptions, so consider the following:
If your roof has no overhang or only has a few inches of overhang, it’s likely that water will accumulate against the foundation, damage flower beds near the foundation, and/or pour down on people as they enter or exit your home. In this scenario, gutters are a must.
If your home has a sharply peaked roof with an overhang of 12 inches or more, rainwater will naturally tend to cascade out and away from the house, rather than dripping straight down to the ground to puddle against the foundation. In this case, gutters may not be necessary.
If your house is higher than the surrounding landscaping, water is unlikely to pool around the foundation, making gutters optional. But if the house is slightly lower than the surrounding ground, gutters are required to channel runoff a sufficient distance from the foundation.
If your house is completely surrounded by concrete in the form of patios, walkways, or driveways, rain gutters might be optional, as the concrete serves as a protective layer between the runoff and the foundation.
If you live in a very arid climate, you might opt out of installing rain gutters.
The Anatomy of Rain Gutters
As with most industries, the world of gutters has its own vocabulary and specific monikers for the various bits and pieces that comprise its workings. Learn more about the parts of gutters here.
Downspouts: This is part of the gutter that runs vertically down the side of the house, transporting water from the roof to the ground or collection vessel.
Downspout Elbow: The downspout elbow is an angled piece of downspout that fits at the bottom of the downspout and directs water away from the home’s foundation.
Pipe Cleats: Pipe cleats secure the downspout to the house.
End Caps: End caps fit to the end of a gutter length and seal off the gutter.
Hangers: Hangers are strips of metal that support the bottom of the gutter, preventing it from sagging.
Ferrule: Ferrules are a hollow shaft that encloses the long screw (also known as a “spike”) that attaches the gutter to the house.
Gutter: Gutters are sold in pieces of varying lengths. Each piece of gutter is called a “section.”
Mitered Corner: This is a corner piece of gutter that fits to the corner of the roof.
The Basic Rain Gutter Styles And Sizes
Rain gutters come in these three styles.
Half-Round Types of Gutters
1. Half-round gutters, shaped like a tube cut in half, carry water very effectively.
Their open, trough-like shape makes them prone to leaf and debris clogs—the reason many homeowners choose to install leaf guards. Plus, their curved sides mean they don’t sit flush against the fascia boards, so generally, brackets are required to keep them in place. While half-round gutters aren’t particularly decorative, they are the traditional style found on homes built prior to 1960; if you live in an older neighborhood or in a historic home, local ordinances might require this type of rain gutter.
K-Style Types of Gutters
2. K-style rain gutters somewhat resemble the letter K when viewed from the side.
This is the most common type for homes built within the past 50 years, though many owners of older homes still install them today. Thanks to the flat back of the K-style gutter, you can nail it directly to the fascia board; no brackets required. But what really makes K-style gutters so popular is the typically decorative front side, which generally resembles crown molding. Thanks to their flat bottoms and straight, outwardly angled sides, K-style gutters usually can carry more water than half-round gutters, so they’re especially suited to rainy climates. On the downside, K-design gutters are a little harder to clean than half-round gutters, as the inner angles collect rotting debris.
Custom Fascia Types of Gutters
3. Custom-built fascia gutters have a sleek, contemporary look.
Unlike K-style or half-round gutters, fascia gutters aren’t sold in sections that fit together, leaving seams that are prone to rust and leaks. Instead, fascia gutters are custom built for the house out of one long stretch of aluminum. Fascia gutters are pricey and must be professionally installed; you can pay as much as twice for them as half-round or K-style gutters, which you could install yourself. This can add up to hundreds of dollars, depending on the size of your home.
Comparing Common Rain Gutter Materials
Wood, once the common material for constructing rain gutters, is prone to rot and weathering. So while you might still see wood gutters in very old, historically significant neighborhoods, today’s rain gutters are generally made from aluminum, vinyl, zinc, steel, or copper. Half-round and K-style gutters are made from all of these materials; fascia gutters are only made of aluminum. Here’s how the five materials compare.
1. Aluminum is the most popular material for rain gutters, whether seamed or seamless.
Aluminum gutters come in three standard thicknesses: .025 inch, .027 inch, and .032 inch. While the thinnest aluminum is the least expensive, it’s also likely to dent or bend; thicker metal is slightly pricier but generally worth it, particularly if you live in an area with heavy snowfall. You’ll find 10-foot lengths of aluminum gutters in most home improvement centers for DIY installation. Expect to pay around $2 to $3 per linear foot for DIY K-style aluminum rain gutters, and twice that if you have them professionally installed.
Lightweight and easy to install
Available in many colors and can also be painted
Can last up to 25 years
Can dent or bend
2. Vinyl is the least expensive choice, and the easiest for DIY installation, as it’s lightweight, fairly easy to cut, and snaps together.
You’ll find vinyl gutters in a few different colors, and they can be painted to suit. Vinyl is the least-durable gutter material; you’ll typically get around 20 years’ use from vinyl gutters in climates that aren’t too severe. It’s also prone to fading in bright sunlight. Expect to pay around $1 to $2 per linear foot for DIY vinyl K-style rain gutters and up to $5 per linear foot for professionally installed gutters.
Lightweight and inexpensive
Can be painted
Easy for DIY installation
Not damaged by salty air
Won’t corrode or rust
Becomes brittle in high-heat climates and can crack when exposed to hard freezes
Color fades with intense sun exposure
Prone to cracking if a ladder is leaned against them
Zinc Types of Gutters
3. Zinc rain gutters are expensive but highly durable, resisting corrosion, weathering, and warping.
You can expect up to 50 years of use from your zinc gutters (somewhat less if you live near the ocean or anywhere else with salty air). Although they start off a dull gray, zinc gutters will develop an attractive patina over time. Zinc gutters require professional installation, as the joints and ends must be welded, and are usually only used on historic or high-end homes. Expect to pay around $10 to $22 per linear foot for professionally installed zinc rain gutters.
Won’t rust, warp, or fade
Develops an attractive patina over time
Not suitable for DIY installation
Somewhat intolerant to salty air or acidic runoff from cedar-shingled roofs
Steel Types of Gutters
4. Steel rain gutters are more durable than aluminum gutters, particularly in severe-weather climates.
Most steel rain gutters are galvanized to increase rust-resistance, but oxidation will generally still take hold within 10 to 15 years. And while leaf guards help extend the life of any type of rain gutter, they’re especially important with galvanized steel gutters, as sodden masses of fallen leaves speed the onset of rust. Stainless steel gutters won’t rust, but they’re considerably costlier than galvanized steel. Because steel gutters are quite heavy, DIY installation isn’t recommended. Expect to pay around $8 to $10 per linear foot for professionally installed galvanized steel gutters, and nearly twice that for stainless steel.
Holds up to all types of weather
Can be painted
Prone to rust
Copper Types of Gutters
5. Copper has a unique beauty, but the shine will eventually give way to a greenish patina.
Many homeowners feel that weather-worn copper contributes to its old-world appearance. And though copper is extremely durable–it’s unfazed by any weather condition from highest heat to coldest freeze–it’s also the priciest type of rain gutter, and it isn’t suitable for DIY installation. Generally used only on high-end homes, copper rain gutters can last up to 100 years if properly installed and welded. Expect to pay as much as $15 to $25 per linear foot for professionally installed copper gutters.
Beautiful glow that eventually develops a greenish patina
No need for painting
Extremely durable in all types of weather
Won’t rust or warp
FAQ About Types of Gutters
How much does it cost to install gutters per foot?
The cost to install gutters depends on the gutter material. Vinyl gutters cost about $3 to $5 per linear foot; aluminum gutters cost between $6 and $12 per foot to install. Copper can run as much as $40 per foot for installation. Complicated architectural or structural features can increase costs.
How long do gutters last on a house?
It depends on the material the gutter is made from. Vinyl gutters last only about 10 years, while copper gutters can last 100 years. Gutters made of the most commonly used material, aluminum, last about 25 years.
How do you fix sagging gutters?
Sagging gutters can be fixed in a couple ways. First, check that your spikes are still tight; tighten or replace loose spikes. You can also fit gutter hangers in the affected areas, or tighten the screws on existing hangers that may have become loose.
Can you replace the roof without replacing gutters?
You can. Many homeowners choose to replace the gutters when they get a new roof, but it is not necessary. Check with your roofer; sometimes they make assumptions and you’ll want to be on the same page before work begins.
It may be time to call a pro
Get a free, no-commitment estimate from us. Your Lafayette, Louisiana gutter repair specialists near you. You can call us at (337)366-0814 or message us here.